Bobtail Capillary Unit

Wellhead Control Products, Inc.
501 N. Richey
Pasadena, TX 77506

The truck:
Make/Model: Chevrolet 2003 CC8500 regular cab tandem chassis truck.
Engine: 250 HP Caterpillar engine with 800 ft. lbs. of torque.
Transmission: Standard 6 speed Fuller with twin PTO ports.
The Frame rails are extended to 25 ft. behind cab, and upgraded to 110,000 psi
yield strength material and equipped with inverted "L" stabilizer system.
High idle controller with automatic safety shutdown system.
Heavy Front axle with 14,000 lbs. capacity and leaf spring suspension.
Dual rear axles with a combined capacity of 34,000 lbs, and 4.11 axle ratio.
13.2 CFM liquid cooled and engine mounted air compressor.
High output 130 amp alternator.
AIR CAM antilock brakes with spring applied parking brake. (air drier and drain)
Two 50 Gallon fuel tanks.
Interior: Cloth seats with optional dual occupant passenger seat. (3 occupants)
Air conditioning, rubber floors, manual locks and windows, insulation and
rear trim panel for noise reduction, interior lighting, and standard radio.

Hydraulic system:
2 PTOs mounted on the transmission and 1 PTO on the engine block drive 6
2 stage pumps
A large capacity hydraulic reservoir with baffling, clean-out port, sight glass,
internal suction filters, and manually operated shut-off valves.
Hydraulically operated oil cooler
Steel frame control console with stainless steel panels, aluminum skin, and
protective lid. All necessary gauges and valves for complete unit operation.

Capillary Tubing Reel Skid
Skid designed to hold standard wooden shipping spools
Stationary level wind arms
Manually operated trolley system
Tubing counter with large number readout
Live swivel connection for pump hookup


Injector Head:
Maximum load: 5000 lbs
Maximum speed: 200 fpm
Snubbing capability: 2000 psi.
Direct drive motors
80 pitch drive chains
Solid skate design with inside traction.
Downward chain tension for snubbing ability.
36" radius gooseneck with Teflon rollers.
5,000 lbs. Load Cell.
Protective frame with lifting sling

Hydraulically Operated Crane
Corner mounted crane with down and out type stabilizers
Capacities:
8,000 lbs. at 6ft. length
6,250 lbs. at 8ft. length
5,000 lbs. At 10ft. Length
4,166 lbs. At 12 ft. length
3,125 lbs. At 16 ft. length
2,777 lbs. At 18 ft. length
2,500 lbs. At 20 ft. length

Optional Equipment

Diesel Generator

Chemical Pump

The unit will be painted with quality industrial paint to customer's color choice.

For more information please contact

Vernon Hough
Service Specialist
vernon@wellheadcontrol.com
713-475-2310
or
Kevin Hunt
Technical Designer
kevin@wellheadcontrol.com
713-475-2310